Ruined to Rescued: Three Steps To Save a Wet Carpet
If you’ve ever had a pipe break in your home, you know that the aftermath can be as costly as it is messy. Before you get out your credit cards, you should know in most cases it’s possible to rescue a waterlogged carpet!
As long as the source of your flood is clean, following a few simple steps can save you a lot of money.
Stem the Flow
The first step to rescuing your rugs after a pipe break is to make sure the water has stopped flowing as soon as possible. The less water that comes in contact with your floor, the easier your floor will be to save. Locate the source of the leak and turn off the water as soon as you can.
Once you’ve stopped the flow of the water, it’s time to start drying your floors. Gather as many towels as you can find and start blotting! Lay the dry towels over the wet area and apply pressure to soak up as much water as you can. Once the towel is saturated, replace it with a dry one and keep going. If your carpet is white or light in color, just be careful not to use brightly colored towels that may bleed dye and cause staining.
Crank the Air
While you are blotting, get dry air flowing through the room. If it’s not humid outside, open doors and windows to create a cross breeze through the room. You can also crank up your air conditioner or turn on your central heating system. If you have a dehumidifier in your home, using it will also help.
Taking these three easy steps can put you and your rugs well on the way to restoration. In the event of a serious flood, you may want to contact an expert remediation specialist in Seattle, Washington who can help prevent odors or mold. When you have a pipe break, the key is to move quickly to avoid lasting damage to your carpets and floors.